For those of you who need tips Troubleshooting hard drive, easy to hope the tips below useful if you have an event in which the disk is not working properly. It seems trivial, but what if the hard disk in a critical data and other offices. Hope I can help you.
For IDE :
1. Is your hard drive spinning? If it does not spin, check whether power connector and interface cable is mounted with well.
2. Was recognized by the computer hard drive? Check if drives have been enabled in the BIOS. If not select option autodetect.
3. Is your hard disk by FDISK detected? Run program FDISK with the fdisk / status to make sure the drive exists.
4. Do you think Scandisk free hard disk damage? If found a fault, then it becomes a problem.
5. Is the maximum capacity of hard drives appear? Ensure BIOS to auto-detect and LBA mode enabled on. If BIOS has a limitation, then you need to use Drive Overlay as DiscWizard Starter Edition.
For hard disk SATA :
1. Is the drive spinning? Produce rotating drive buzz and a click. If the disk is not rotating, check power and cable connector interface is mounted well.
2. Was recognized by the computer hard drive? Check if disk has been enabled in the CMOS system or program setup. If not, select the option auto-detect and run. If your hard disk problems, it may not will be recognized by the system. If the operating system does not recognize the hard drive, then you have to load drivers adapter.
3. Is your hard disk by FDISK detected? Run program FDISK in Windows startup diskette. Type fdisk / status to make sure that the disk exists and recognized by the system.
4. Do you think Scandisk free hard disk damage? Scandisk is a utility that is in the startup diskette Windows is checking whether there is damage to your hard drive. If there is damage, then it could be a problem.
5. Is the computer hangs at startup time? Check whether your system is compatible with Serial ATA. You need a compatible motherboard connector with Serial ATA 1.0 or Serial ATA adapter for using a SATA hard drive.
For IDE :
1. Is your hard drive spinning? If it does not spin, check whether power connector and interface cable is mounted with well.
2. Was recognized by the computer hard drive? Check if drives have been enabled in the BIOS. If not select option autodetect.
3. Is your hard disk by FDISK detected? Run program FDISK with the fdisk / status to make sure the drive exists.
4. Do you think Scandisk free hard disk damage? If found a fault, then it becomes a problem.
5. Is the maximum capacity of hard drives appear? Ensure BIOS to auto-detect and LBA mode enabled on. If BIOS has a limitation, then you need to use Drive Overlay as DiscWizard Starter Edition.
For hard disk SATA :
1. Is the drive spinning? Produce rotating drive buzz and a click. If the disk is not rotating, check power and cable connector interface is mounted well.
2. Was recognized by the computer hard drive? Check if disk has been enabled in the CMOS system or program setup. If not, select the option auto-detect and run. If your hard disk problems, it may not will be recognized by the system. If the operating system does not recognize the hard drive, then you have to load drivers adapter.
3. Is your hard disk by FDISK detected? Run program FDISK in Windows startup diskette. Type fdisk / status to make sure that the disk exists and recognized by the system.
4. Do you think Scandisk free hard disk damage? Scandisk is a utility that is in the startup diskette Windows is checking whether there is damage to your hard drive. If there is damage, then it could be a problem.
5. Is the computer hangs at startup time? Check whether your system is compatible with Serial ATA. You need a compatible motherboard connector with Serial ATA 1.0 or Serial ATA adapter for using a SATA hard drive.
0 komentar:
Post a Comment
Dear friend, if you blogger from Indonesia please coment english language for the continuity of this blog and we are together. I love you all.